GSC S3 Camshafts 280/280 Billet Mitsubishi EVO 8 Vehicle Model_S2000 The bumpsteer curve can be

The bumpsteer curve can be adjusted by changing the length of the traction rods

This design allows the clutch to maintain strong holding power under intense racing conditions while ensuring durability during repeated high-load launches and hard shifts

Water Temp

3 Bar / 19 psi Turbine Housing: 8 cm2 Max

The GrimmSpeed AOS coalesces oil without using a mesh media as mesh medias can cause contaminants to collect and build up resulting in possible sludge

GSC S3 Camshafts 280/280 Billet Mitsubishi EVO 8 Vehicle Model_S2000 The bumpsteer curve can bePart #: 7008S3 The Billet S3 Cams for the Evo 4 8 4G63. These cams are meant for the 800whp+ to take advantage of a very large turbo. these are NOT suggested for anyone running smaller than the 67mm to GT42R turbo. **If using aftermarket cam gears(especially AEM) check the bolt lenght, some cam gears are too thick for the OEM bolt on the Billet cams, a 40mm underhead lenght bolt may be necessary in this case** 7008S3 Billet ADV Duration Duration @ 1mm